June 2023
Feather Pogo Pin Tester
Functional Requirements
- Support the mounting of a microcontroller, another FeatherWing, and a custom FeatherWing for testing.
- Use pogo pins to mount the custom FeatherWing so it can be tested without soldering Feather headers.
- Allow room for a 3x extended custom FeatherWing
- The position of the toggle clamps used to press the custom FeatherWing into the pogo pins should be flexible so that an appropriate pressure point on the custom FeatherWing can be identified without damage to mounted components.
Related Links
How to Make a Pogo Pin Test Jig
Under Development
Do you need help developing or customizing a IoT product for your needs? Send me an email requesting a free one hour phone / web share consultation.
The information presented on this website is for the author's use only. Use of this information by anyone other than the author is offered as guidelines and non-professional advice only. No liability is assumed by the author or this web site.
.png "Feather troubleshooting")
.png "Feather M0 + LoRa 900 MHz")
